MATFER 2018

313 1 4 2 3 5 6 PROCESS: 1- Place the stainless steel sheet on a flat surface and position the first chosen frame. 2- Fill the first frame placed on the special sheet with the chosen filling. 3- Smoothen with a rule. Cool to harden based on the filling used. 4- Then place the second frame on the first, use another filling and smoothen. 5- Proceed in the same way for the third filling. Freeze the whole set with the sheet if required. 6- Turn out by removing the frames one by one. (do not heat with a torch but use a blow air gun instead ). Thus entremets that are ready to cut can be easily made, with successive layers that are uniform providing a beautiful effect and reducing the assembly time. Layers of biscuits can also be inserted between the fillings. STACKABLE FRAME SETS